French Rolling Pin | Build It | Ask This Old House

From the creator

In this video, Ask This Old House general contractor Tom Silva and host Kevin O’Connor, turn a French-style rolling pin with an ornate detail in the center using a lathe. SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse. Host Kevin O’Connor joins Tom Silva in the workshop to learn how to make a French rolling pin on a lathe. A French rolling pin has handles that are fixed in place, whereas American rolling pins have handles that move independently from the roller. Time: 2 days (glue needs to sit overnight) Cost: $40 Skill Level: Hard Tools: Sliding compound miter saw [https://amzn.to/2SMRQAe] Lathe [https://amzn.to/3hopTsH] Bar clamps [https://amzn.to/3eIc86d] Roughing gouge [https://amzn.to/33CM2vk] Pencil [https://amzn.to/3hs7V8C] Calipers [https://amzn.to/3y96ge9] Parting tool [https://amzn.to/3boXVJH] Skew chisel [https://amzn.to/33JCChD] Sandpaper [https://amzn.to/3uXR0yV] Small brushes [https://amzn.to/3eLZmUC] Shopping List: Mahogany [https://thd.co/3y6SWH3] Maple [https://thd.co/3tEp3uk] Painter’s tape [https://amzn.to/3boIYXW] Wood glue [https://amzn.to/3w1ZW69] Food safe finish [https://amzn.to/3bjMhzF] Where to find it? Tom used a REVO 12|16 110V lathe [https://amzn.to/3hopTsH], which is manufactured by Laguna Tools [https://lagunatools.com/]. The tools Tom used to actually turn the rolling pin can be found at any specialty woodworking store. To create the custom piece of wood for turning, Tom used leftover pieces of mahogany and maple that h

Published 2021-05-19 · Watch on YouTube ↗
Availability and playback restrictions are controlled by the original channel.