13:51End Grain Cutting Board from Scrap Wood | Build It | Ask This Old House
From the creator
Ask This Old House general contractor Tom Silva and host Kevin O’Connor create an end grain cutting board from heart pine scrap wood SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse Time: 4-5 hours Cost: $20 (if scrap wood is used) Skill Level: Hard Tools List: Surface planer [https://amzn.to/34v0sNl] Table saw [https://amzn.to/2Uyg0LF] Clamps [https://amzn.to/2ZC0tAg] Miter saw [https://amzn.to/2zZbqMY] Cutting track [https://amzn.to/2PQGYPT] Circular saw [https://amzn.to/2zWYuY0] Router [https://amzn.to/34lEM62] Round over router bit [https://amzn.to/2LuU1Bc] Cove router bit [https://amzn.to/2Lv5Irt] Power sander [https://amzn.to/34Dgo02] Shopping List: Wood glue [https://amzn.to/2zYr3V2] Paint brush [https://amzn.to/34qPSXu] Mineral oil [https://amzn.to/2ZE2prJ] Steps: 1. Choose scrap wood that’s at least 2x12. You may end up using 2-3 pieces of scrap wood. 2. Use a surface planer to ensure all pieces are a consistent thickness. This is a loud machine, so wear hearing protection. 3. Use the table saw to rip the board into 2” strips. 4. Realign the boards back together for gluing. Before gluing, flip the boards to alternate the grain, avoiding warping. 5. Flip the boards once and use wood glue to make a line across each board. 6. Use a paint brush to fully coat the board with the wood glue. 7. Flip each board back and push the glued surfaces together. Clamp the boards together to allow the glue to set up. Wipe down any excess glue on the surface. Let i
Published 2017-02-27 · Watch on YouTube ↗
Availability and playback restrictions are controlled by the original channel.





