tubeshowcase●1,669,464 videos♡ My collection 0
← DIY & Crafts

DIY & Crafts09:11

DIY Shoe Rack | Build It | Ask This Old House

This Old House ↗

From the creator

Ask This Old House general contractor Tom Silva and host Kevin O’Connor build a combination bench/shoe rack out of fir decking. SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse Time: 4-5 hours Cost: $150 Skill Level: Moderate Tools: Miter saw [https://amzn.to/2KneNCF] Table saw [https://amzn.to/2KpFzub] Sanding block [https://amzn.to/3cBzPJN] Drill driver [https://amzn.to/2RZfZQV] Pocket hole jig [https://amzn.to/3avZLoL] Shopping List: 1x4” fir porch decking [https://www.homedepot.com/p/Alexandria-Moulding-1-in-x-4-in-x-8-ft-Douglas-Fir-S4SE4E-Mixed-Grain-Board-001X4-DM096C/206876429] 2x2” baluster stock [https://www.homedepot.com/s/2x2%2520baluster%2520stock?NCNI-5] Sandpaper [https://amzn.to/3cFBv4Q] Wood glue [https://amzn.to/3bydBIC] Pocket screws [https://amzn.to/34YTAbK] Spray-on high gloss urethane [https://amzn.to/2RYEg9A] Spray-on satin urethane [https://amzn.to/2VKiyY0] Steps for building a shoe rack: 1. Start by cutting all the pieces of the fir decking. To ensure each repetitive cut has the same dimension, Tom recommends using the stop on the miter saw. Cut pieces for the rails and slats that will eventually make up the shelving for the shoe rack. 2. Using a table saw, cut dados into the rails and rabbets on both ends of each slat. 3. Sand all the pieces individually before assembling using a sanding block. 4. Insert the slats into the rails. Add filler pieces the thickness of the dado and the same width as the slates into the dado to fi

Published 2020-04-29 · Watch on YouTube ↗
Availability and playback restrictions are controlled by the original channel.

Keep exploring DIY & Crafts