13:13Building a First Tool Box | Generation Next | Ask This Old House
From the creator
Ask This Old House General Contractor Tom Silva teaches a young fan how to build her first tool box. SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse Time: 2-3 hours Cost: $75 Skill Level: Beginner Tools List for Building a Tool Box: Hand saw Hammer Pencil Combination square Drill driver with 1” spade bit Palm sander Shopping List: 1x5 select pine 1x10 select pine 1” Dowel Box nails 80-100 grit sandpaper Wood glue Steps: 1. To determine the correct length for your tool box, use the longest tool in your tool box as a guide and mark just beyond it on a piece of 1x5 pine. 2. Cut the board on the mark using the hand saw, making sure that your shoulder is perfectly lined up with the edge of the saw to ensure a straight cut. 3. Repeat this process for the other side of the tool box. 4. Cut the ends to desired length using 1x10 pine. 5. The length of the bottom of the tool box should be the length of the sides, plus the thickness of the two ends. Mark and cut the bottom to that dimension. 6. To dress up the ends of the toolbox, cut the tops of each end piece at an angle using the hand saw. 7. Drill holes in the two ends of the tool box using the drill driver to accept the handle. Chose a bit that matches the size of the dowel you have and drill through both end pieces at the same time to ensure the hole is aligned correctly. Drill most of the way through both pieces, but to prevent chipping, flip the boards over and drill from the other side to complete th
Published 2017-10-15 · Watch on YouTube ↗
Availability and playback restrictions are controlled by the original channel.





