37:345 Things You Should Never Do In A Turbocharged Vehicle
From the creator
5 Things You Should Never Do In A Turbocharged Car 5 Things You Should Never Do Playlist - https://goo.gl/SxoUi7 Subscribe for new videos every Wednesday! - https://goo.gl/VZstk7 1. Do not run the engine hard after start-up. Most people know you should let your engine warm up before running it hard, but many cars only have coolant gauges. Engine oil tends to take longer to heat up, because you don’t have a thermostat like the coolant does, which isolates the coolant in the engine block and regulates its temperature. Oil that isn’t heated up won’t flow as fast as oil at operating condition, which means you’ll have less protection at engine start up. This is especially true for turbocharged vehicles, because you also have oil feeding the bearings of the turbocharger, which spins at insanely high RPM and produces significant heat, so you want to make sure you have proper oil flow through the turbo. It will be different for every car, but it could be an additional several minutes before your oil temperature is near your engine coolant temperature. 2. Don't shut the car off immediately after running it hard. You’re going to have hot spots where the engine components, and especially the turbocharger, are still significantly hotter than your engine oil temperature. If you shut off the engine, the oil no longer flows, and thus pockets of the oil are going to be heated up to very high temperatures. These high temperatures break down the oil, and also burn up and evaporate the ligh
Published 2016-07-20 · Watch on YouTube ↗
Availability and playback restrictions are controlled by the original channel.
Keep exploring Engineering
37:34
42:45
12:58Knowledge Marine & Engineering Works Ltd चा Dredging Business Analysis | Value Chain Analysis
Thodkyat Sangato
12:11Cold Store Racking Start | Complete Guide | M Alam and Sons Engineering Works
NawbZada 50.5M Views 2 day ago ...
01:53
01:33WALL PUTTY AND TILE ADHESIVE PLANT | LAXMI ENGINEERING WORKS
Laxmi Engineering works (Hariom Saini)
04:14