tubeshowcase●1,671,252 videos♡ My collection 0
← DIY & Crafts

DIY & Crafts02:45

3 Ways to Make Multiple Cuts with a Miter Saw | House One

This Old House ↗

From the creator

Watch House One editor Jenn Largesse demonstrate three easy ways to make multiple cuts using a miter saw. #ThisOldHouse #AskTOH SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse Repeating a cut on a miter saw seems easy enough, but measuring and marking rarely yields pieces that are evenly sized. To get better results, This Old House DIY Expert and House One editor Jenn Largesse shares three easy ways to cut multiples. How to Make Multiple Cuts with a Miter Saw 1. Use the First Cut as a Template The first and most obvious way is to use the first cut board to size the next cut. Do this by placing the cut board on top of the uncut board with the ends flush. Lower the blade slightly, and then slide the two boards until the cut boards hit the side of the blade, remove the board and then make the cut. The key is to keep using the same board, not the most recently cut board so that the measurement doesn’t slightly “grow” over time. The downside of this method is that the blade can shave a bit more off of the subsequent cut, so there can still be a bit of variance. 2. Cut Multiple Boards at the Same Time The second way to make repetitive cuts it to “gang cut” or cut multiple boards at the same time. To do this, stack the boards with their ends flush and then cut through all the pieces with one cut. The upside is that you get perfectly even cuts. The downside is that this isn’t possible if you making multiple cuts from one board or if you have so many cuts tha

Published 2020-08-15 · Watch on YouTube ↗
Availability and playback restrictions are controlled by the original channel.

Keep exploring DIY & Crafts